SIM2 has been involved in making high definition projectors since the introduction of the original analog HDMAC format called EUREKA 95 in 1990. The latest HDTV format 1080p is available from a variety of sources and offers the highest quality picture resolution, but also places great demands on a display device to reproduce this extraordinary picture resolution as accurately as possible.
SIM2's new Grand Cinema™ HT5000E is an ultra-high end digital projector that delivers picture detail that has to be seen to be believed.
The Grand Cinema HT5000E uses the very latest DLP® chipsets from Texas Instruments to create the last word in picture quality from HDTV sources. Three 0.95" DarkChip4™ DMDs are utilized in this design to generate a picture resolution of 1920 x 1080 pixels (1080p) and a superior contrast ratio of > 6,000:1, to create crystal-clear, uncompressed HDTV images.
The finest quality precision glass optics are used throughout the light engine of the Grand Cinema™ HT5000E, the clarity, color-uniformity and edge-to-edge focus capabilities of these specialized optical components are vital to the process of producing the breathtaking clarity of on-screen images.
SIM2 offers six high quality lens options for the HT5000E, ranging from short-throw wide-angle (0.67:1) through to long-throw (4.16-6.96:1). Motorized zoom, focus, and lens shift (vertical and horizontal) complete the package.
As befits an ultra-high end projector, HT5000E is equipped with SIM2's Live Color Calibration software, a PC-based calibration system, featuring full seven-point adjustment of Primary, Secondary and White Point, enables pin-point accurate calibration of the projector in any home theater or professional system.
The Grand Cinema™ HT5000E can be connected to a wide selection of video sources via its comprehensive input panel: six pure digital HDCP-HDMI inputs, an array of analog inputs, and professional format digital SDI input. A dedicated 10/100 Mbit Ethernet connector is fitted as standard, allowing the HT5000E to be connected to a LAN network or to the internet. This network connection can be used to remotely control the projector using TCP/IP commands or to feedback projector operating status information.
HT5000E / previous model HT5000 Technical Features
Technology: 3 chip DMD 0,95" 1080p DarkChip4™ (HT5000: DarkChip3)
Resolution: 1920 x 1080 pixels
Lens: High quality, high resolution optics with both motorized zoom and focus adjustments and motorized horizontal/vertical shift
Lamp power & life time*: 300W (dimmable to 250W), 1500 hours* normal mode or 2000 hours* eco mode
Lens Type L0: Throw ratio 0.67:1 (Fixed wide angle)
Lens Type L1: Throw ratio 1.12:1 (Fixed wide angle)
Lens type L2: Throw ratio 1.39 - 1.87:1
Lens type L3: Throw ratio 1.87 - 2.56:1
Lens type L4: Throw ratio 2.56 - 4.16:1
Lens type L5: Throw ratio 4.16 - 6.96:1
Lens shift: V+70% / -30%; H +/-15% - not available on lenses type L0 and L1.
(HT5000: V+/-100%; H +/-64%)
Digital keystone adjustment: V+/-22°
Picture size (inches diagonal): 50-300
Aspect ratio: 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments
Horizontal & vertical scan freq.: 15-80kHz/48-100Hz; 24 Hz (1080p only)
Video and Graphic standards: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3,58; NTSC 4,43 automatically selected; HDTV: ATSC (480p, 720p, 1080i, 1080p); EU 576p + 1080i 50Hz + 1080p 24 Hz; PC graphic: VGA, SVGA, XGA, SXGA, UXGA
Contrast ratio (Full ON/ Full OFF): >6000:1 (HT5000: >5000:1)
Format Board: 10 Bit
Video processor: built in
Special video adjustments: Dynamic Noise Reduction, Spatial Noise Reduction
1 x Composite Video (RCA)
1 x S-Video (mini Din 4 pin)
1 x RGBS/YCrCb (4x RCA)
1 x RGBHV/YCrCb (5x BNC)
6 x HDMI - HDCP compliant (6x HDMI)
1 x OUT Digital Audio (Toslink)
1 x DVI (1x DVI-D)
1 x HD-SDI (1x BNC)
2 x VGA (DB15)
1 x RS232 (DB9)
1 x USB connector (USB)
1 x LAN (RJ45)
2 x OUT 12V 100mA (via Jack)
Software control: upgradable via RS232 serial interface, USB and LAN
Mains voltage range: 100-240Vac ±10% (48/62Hz)
Power consumption: approx. 400W
Weight: approx. 45 Kg (99.2 lbs)
Dimensions (WxHxD): 570x260x730mm (22.4"x10.24"x28.7")
Installation and User Manual; AC power cords (6.6 ft); backlit remote control and batteries
The DLP® logo and DLP® medallion are trademarks of Texas Instruments.
(*) Lamp life: the hours quoted have been measured in a lab under strict test conditions. Lamp life varies depending on usage conditions and the surrounding environment. The measured lamp life cannot be guaranteed and is not protected by warranty